New Plastic Miniature Army Boxes Pre-Orders


We have put the New Heavy Gear Blits Plastic Miniature Army Boxes, Two Player Starter Box, and new Quick Start Rulebook up for Pre-Order on the Dream Pod 9 Online Store. Please note that orders with these new Pre-Order products will only start shipping after all our Kickstarter Backer Reward Packages have been shipped out in September.

Jovian Chronicles News!


Several years back Phil sculpted some small Fleet Scale Lancer and Wraith Fighters for Jovian Chronicles. They were made for a planned Fleet Scale version of Jovian Chronicles, that was never completed, back around the time we did our Heavy Gear Fleet Scale game. We finally located the models that had been stored away and added a small ball socket hole on the underside of each of them. These small fighter 2 squad packs are now available to purchase for the first time. If we get enough interest (orders) for the new fleet scale fighters there will be fleet scale exos in the future and maybe a few new spaceships as well. Here is a link to the Jovian Chronicles Miniatures section of the online store for all interested in supporting a rebirth of Jovian Chronicles.

Plus, we also have some of the Jovian Chronicles 2nd Edition Lightning Strike Rulebooks and Companions still available for purchase.

Crowd Funding Pledge Total


$173,646 CAD

(Pledges as of March 13th, 2015)

Our Extra Crowd Funding Drive ended on March 1st 2015. Thank You All for helping us to unlocked the Kodiak and Ammon miniatures and add one of each to the Core Starter Set.

The Pledge Manager is now locked.

War for Terra Nova - Kickstarter


The Heavy Gear Blitz - War for Terra Nova - Plastic Miniatures Core Starter Set Kickstarter was successfully funded. We raised just over $150K CAD to produce molds needed to make plastic miniatures for our Heavy Gear Blitz Tabletop Wargame.

We will be doing some additional crowd funding to try and unlock a few more model molds for stretch goals not reached during the Kickstarter.

News

Kickstarter Update: Small Issues with Parts on Several Sprues and Shipping Update

It was brought to our attention this week that a few parts on several of the model sprues have some small issues with dimpling and shrinkage. Its a learning Kickstarter for us and we do our best below to explain the small issues, where they occur and why.

Dimpling can occur on parts when the molds are being setup to run at the best pressure and temperature for the molten plastic. Models LLC may have accidentally included some of the pops, made while the molds were being dialed in, with our shipment thinking they looked like good sprues. We spotted some dimpling occurring on the head part of some of the Hunter sprues and the main hull of some of the MHT-95 Hovertank sprues. Backers brought to our attention some shrinkage on the engine part of the Jager sprues, which we missed completely in our initial check of the model spues when we received them. A few backers have also reported some dimpling occurring on the butt plate area of the Hunter as well. The dark color of the plastic makes it difficult to see, on the next plastics run, we'll ask Models LLC to use a slightly lighter color of grey. The test pops that we received from the mold manufacturer to approve the molds and that were assembled and painted up to show everyone did not have these small dimpling or shrinkage issues. One other thing that we failed to notice was a missing detail on the hip part of the Mounts B sprue. The upper left side of the hip part seems to be missing the upper part of the "X" detail on most sprues. We have included images below of the issues with the various parts on their sprues for everyone to see.

The small issues do not effect game play or the overall look of the models once assembled. There is not much we can do at this point about these small issues as all the plastics have already been popped and delivered to us by Models LLC for all the backer reward packages and we have shipped over half the packages to backers already and getting replacement parts made and shipped out would be very costly. Most of the dimpling can be fixed by players with a little bit of modeling putty to fill-in the area before painting. For the missing "X" detail on the upper left side of the Mounts Hips the missing detail can be painted on or just paint the hips part black so the missing detail is not noticeable.

We have contacted Models LLC about all the issues to make sure they are aware of the sprues with issues to better dial-in the molds or fix them before we run the molds again. One other issue that some backers have asked about is small crack lines on the surface of some of the larger parts. We ask Models LLC about them and we told that the larger parts have multiple entry gates where the molten plastic enters the part cavity and as the part files up the areas were these different flows of molten plastic meet form the crack lines we see on the surface. These crack lines are very small and disappear when the model is painted. Another thing we have seen on some of the larger parts is a black residue that can easily be scrapped off. Models LLC has informed us that when air gets trapped in the mold and the plastic is forced in under high pressure and temperature it can actually cause the trapped air to com-bust leaving the black residue on the surface. They plan on adding some small air venting where need before the molds are run to solve this issue.

Now a quick shipping update we shipped out the last of Wave 2 backer reward packages on Saturday along with some of the Wave 3 packages and have now shipped a total of 678 backer reward packages. We plan to finish shipping the Wave 3 by the middle of this week and then get started on the 4th and final shipping wave.

After all the backer reward packages are shipped, we'll be able to put some more time on the painting guide for the miniatures. In the mean time we wanted to share a Northern Jaguar painting guide video posted on YouTube by one of our backers here is a link to it for everyone to checkout.

mobil porno

https://www.youtube.com/watch?v=BZpaNC19Asg

 

More News…

Jovian Chronicles Fleet Scale Wave 3 Venus Fighter and Exo-Armors in Pewter!

We received the rapid prototypes last week for the Venus Brunnhilde Fighter, Rye Exo-Armor, and Bonebreaker Exo-Armor. The production molds were made earlier this week and I took photos of the first pewter sets to be cast-up. Then assembled a squad of each, primed them in grey, and took a group photo of the three new Venus releases, checkout the attached image to see how they turned out.

Jovian Chronicles Fleet Scale Wave 3 Venus!

Tony decided to give a little loving to the Venus faction this time around. He made 3d Models of the Brunnhilde Fighter, the Ryu (stock and command) Exo-Armor, and the Bonebreaker (stock and command) Exo-Armor for Venus. Checkout the image below to see how they turned out.

These new Wave 3 Jovian Chronicles Fleet Scale Fighter and Exo Models are now available to Pre-Order, for shipping in early May. Here is a link to the Jovian Chronicles miniatures section of the DP9 Online Store to place your Wave 3 Pre-Orders now.

Kickstarter Update: New North & South Test Pop Plastic Models!

This weeks update shows the new Northern and Southern test pop plastic models. We took the time to put together one of each of the Northern models (Hunter, Jaguar, Cheetah, Grizzly, Kodiak, and Ferret shown in both walker and ground mode), see the photo below. Plus the Southern models (Jager, Black Mamba, Iguana, Spitting Cobra, King Cobra, and the 3 Drones), see the photo below. These were all assembled from the test plastic pop sprues we received from the mold manufacturer last week to test where problems are in the molds, they still have some holes and shrinkage on the parts.

Kickstarter Update: First Plastic Test Pops of the C.E.F. Sprues!

We received the test plastic pops for all the molds this week at our office in Montreal. The test pops are used by the mold manufacturer find where problems like not enough molten plastic making it in to the mold parts cavities are located. The test plastic sprue pops show them where additional spruing, ejector pins, and/or increased gate sizes to the parts are needed. We took the time this week to look over all the parts and get our comments back to them so they can tweak the molds to get all the plastic parts looking good.

Pages

Heavy Gear Blitz New Edition News and Downloads

Click here for news on the new edition of Heavy Gear Blitz which is currently under development. With Alpha/Beta playtest downloads of the new rules and armylists. Get involved in the playtesting and help us make the new edition the best miniature game out there!

Follow us on Facebook

Visit our Facebook page for
more news and updates!